[Rom][6.0.1]Lenovo ZUK Z2 PLUS (2132) INDIAN firmware V2.0.093ST using MI Flash tool

I am not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.

Part -A Configure Computer
1) Download and extract the Stock firmware, Setup tools & Drivers
2) Install ADB Drivers
3) Install Lenovo ZUK Z2 PLUS (2132) Drivers
4) Setup Tool all in one
5) Setup Mi Flash tool

Part -B Booting device in to EDL Mode
Note : Thank to @mauronofrio for his tool
1) Enable Android debugging (ADB) in developer options
2) Connect your device to PC
3) open Tool all in one
4) The tool detects your device and pop up a window on your z2 plus device

5) chick and click OK
6) Know go to Tool all in one > Advance Options
7) click Reboot EDL

8) Device will boot in to EDL Mode

Part -C Flashing stock Firmware
1) Open Mi Flash tool
2) Click on refresh to detect your Z2 plus as COM X ( Note : X represents device port numbers )
3) If you want to lock bootloader then select " clear all and lock " which was present on right bottom corner
4)Click on flash

Note : Never disconnect your device while MI tool was flashing
5) It take 300 sec to complete task after that hold power key for 15 sec to boot your device

Lenovo ZUK Z2 Plus ( 2132) Marshmallow
Indian firmware ( Note : all partitions fixed by me )

Mi Flash tool ( Note : Recommended and Modified version by Me for deep partitions )

Tool All In One ( Note : for Booting in to EDL, flashing TWRP , Unlock & lock bootloader )

adb-setup ( Note : Very important )

Other useful links ( If you want